WR44 Series Installation Guide
6
NET
Illuminates steady when a wireless data connection has been
established.
SIM
Illuminates steady when a valid SIM card is installed in the unit.
DAT
Flashes to indicate that data is being transferred over the wireless
network.
SIGNAL
For the WR44-G, -E and -U models, the three indicators labelled
SIGNAL illuminate to indicate the GSM signal strength as follows:
None illuminated
< -113 dBm (effectively no signal)
1 LED illuminated
>= -112 dBm and <= -87 dBm (weak)
2 LED‟s illuminated
>= -86 dBm and <= -71 dBm (medium)
3 LED‟s illuminated
>= -70 dBm and <= -51 dBm (strong)
For the WR44-C the signal strengths are as follows:
None illuminated
< -116 dBm (effectively no signal)
1 LED illuminated
>= -115 dBm and <= -104 dBm (weak)
2 LED‟s illuminated
>= -103 dBm and <= -94 dBm (medium)
3 LED‟s illuminated
>= -93 dBm and <= -83 dBm (strong)
SIM Sockets
The two sockets at the right side of the front panel labelled SIM 1 and SIM 2 are for use
with the Subscriber Identification Module(s) (SIMs) that you will receive from your service
provider(s).
Details of how to insert SIM cards correctly are given in section 2 below.
