WR44 Series Installation Guide
2
Safety Notices
1) Please read all instructions before installing and powering the unit. You should keep
these instructions in a safe place for future reference.
2) The WR44 range is supplied with a 12VDC/1.5A power supply (mains adapter). If the
mains adapter shows signs of damage or malfunction, you should stop using it
immediately, turn off the power at the mains and disconnect it from the mains supply
before contacting your supplier for a repair or replacement.
3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user‟s authority to operate the equipment. Use only the
accessories, attachments, and power supplies provided by the manufacturer
–
connecting non-approved antennas or power supplies may damage the unit, cause
interference or create an electric shock hazard, and will void your warranty.
4) Do not attempt to repair the product. The unit contains no electronic components that
can be serviced or replaced by the user. Any attempt to service or repair the unit by
the user will void the product warranty.
5) Products in the WR44 range are designed for indoor use only and should be used in
an environment that is suitable for computers and other electronic equipment.
6) Ports that are capable of connecting to other apparatus are defined as SELV ports.
To ensure conformity with IEC60950-1 ensure that these ports are only connected to
ports of the same type on other apparatus.
Wireless Networks
The wireless networks supported by the WR44 series routers fall into two categories:
GSM networks (GPRS, EDGE)
WCDMA networks (UMTS, HSDPA, HSUPA )
The type of network supported by each model is summarised in the table below:
Network
Model
GSM
GPRS
GSM
EDGE
WCDMA
UMTS
WCDMA
HSDPA
WCDMA
HSUPA
WR44-E
WR44-U
