1 Introduction
The Transport DR series IP routers facilitate the transmission of data over DSL, ISDN,
PSTN or wireless WAN networks.
The Transport DR provides an ADSL/2/2+/2++ interface along with a 4-port 10/100
Ethernet switch. Optional features include 3G/HSDPA, or 3G/EVDO wireless capability
and 802.11 b/g wireless LAN or PSTN network connectivity.
The routers can be configured either by using commands entered at the serial port (much
like a modem), or via the built-in Web interface. We recommend that you use the Web
interface whenever possible.
In addition to many standard LAN and Internet protocols such as PPP, Transport DR
series products provide a combination of powerful but easy to use configuration,
management and diagnostic tools. This makes it a simple and cost-effective solution for
migrating existing terminal or telemetry equipment from older networks to DSL broadband.
1.1
Front Panel Features
The front panel of the unit incorporates a number of LED indicators depending on the
model, as shown in the following illustration:
USB Host Connectors
The USB host connectors may be used to connect compatible USB 2.0 client devices
such as memory sticks, serial adapters, etc. Note that the total current available to power
USB devices is collectively 0.5A (i.e. for both ports).
Status Indicators
The status indicators operate as follows:
ON
Illuminates steady red when power is applied.
LAN 0, 1, 2, 3
Illuminate steady when there is a network connection to the
associated LAN port and flash when data is transmitted/received.
W-LAN
Illuminates steady when there is a network connection to the
wireless
LAN
interface
and
flash
when
data
is
transmitted/received. (Wi-fi models only)
