Digi SM-500MK4 Service Manual Download

Page: 22 / 95

SM500MK4 Service Manual

4.5 Weigh & Measurement Spec Setup Procedure

To Change the setting of the Weight & Measurement SPEC, if there is some SPEC need to alter.

KEY TO PRESS

OPERATION

In the Weighing Mode, press

then turn On the Span Switch.

-- Go to Z mode

KEY TO PRESS

OPERATION

[1][4][2]

-- Go to Weight and Measure Specification Mode
-- To change the selection for the Spec, press the
Number of the selection.
-- Press ‘

PRINT

’ key to Save go to next Spec

-- Pres ‘

‘ key to go back to previous Spec

-- Press ‘

PLU

’ to save and exit

-- Press ‘

Tare

’ to exit without saving

KEY TO PRESS

OPERATION

[0]

[1]

Then

-- Select data. (Refer to Weight & Measurement
Spec setting)

-- To choose scale type

-- To set. (Save data and increase SPEC No)

KEY TO PRESS

OPERATION

-- Increase the SPEC number without saving data of
the previous SPEC number.

All manuals and user guides at all-guides.com

Summary of Contents for SM-500MK4































































































Search results

Summary of Contents for SM-500MK4

Reviews:

Related manuals for SM-500MK4

Brands by name

Popular brands

Digi SM-500MK4, Service Manual

Search results

Summary of Contents for SM-500MK4

Reviews:

Related manuals for SM-500MK4

Brands by name

Popular brands