TA2020B & IR2110B Installation Guide
12
Step 4
– Initiating a DUN connection
In the main dialog, you are asked to enter a username and password. The default settings
for your unit are “username” and “password” respectively but you should change as soon
as possible in order to prevent unauthorised access to your unit (refer to the section
entitled Configure > Users in the Web Interface and Command Line Reference Guide for
instructions on how to do this). The username is not case sensitive, but the password is.
Note:
When you type the password it will appear as a series of dots to ensure privacy.
Once you have entered these, initiate a connection to your unit by clicking the
Dial
button.
During the dialling and connection process, you may see a series of status dialogs and, if
the connection is successful, the final dialog will indicate that the PPP login has been
authenticated.
After a short delay, this dialog will minimise to a “linked computers” icon in the Windows
taskbar.
You should now be ready to access the built-in web pages using your Web browser. The
default
“web address” for the unit is
1.2.3.4
. By default, this is also mapped to the system
IP hostname
ss.2000r
.
You will need a valid username and password to access the web interface. Once again,
the default settings are
username
and
password
respectively. If these values do not
allow access, you should contact your system administrator.
