TA2020B & IR2110B Installation Guide
13
3.2 Configuring the IR2110B
Once the unit has been installed and powered up, you must now configure it so that it can
communicate with your network and the Internet.
The easiest way to configure the unit is to use the Sar/OS Connection Wizard, available
from the Digi International website. The Sar/OS Connection Wizard will take you step-by-
step through the process of configuring your router. Using the wizard means that you will
not have to change the IP address of your PC. Rather, you will be able to change the IP
address of the router to match the subnet your PC is already on.
Note:
The default IP address for the LAN 0 port is 192.168.0.99, with a default Class C
subnet mask (255
.255.255.0). Setting your PC’s IP address to one on the same subnet
(192.168.0.*) will enable you to connect to the unit’s Web interface. You will then be able
to configure the unit manually without using the Sar/OS Connection Wizard.
Further details of manual configuration can be found in the Digi International Sar/OS
Reference guide.
Step 1
– Install the Connection Wizard
Download the connection wizard from the Digi website and install the software on your
PC.
Step 2
– Run the Wizard
Once the wizard has been installed on your PC, run it from the Windows Start menu.
Step 3
– Decide which configuration method to use
Choose to configure the unit’s Ethernet port only. You must have completed all the
installation steps listed in the previous section.
Step 4
– Configure the unit
Follow the on-screen instructions to configure the unit. Once complete you will be able to
browse to the unit and configure it using your web browser.
