MIL-3000FTX Series of FastPort Print Servers
2-1
I
N
S
T
A
L
L
A
T
I
O
N
C h a p t e r 2
Fa s t Po r t I n s t a l l a t i o n
Chapter 2 gives installation information for the MIL-3000FTX
FastPort print server.
2.1 Installation Requirements
Before installing FastPort, make sure you have the following:
• A MIL-3000FTX FastPort print server
• Power supply
Use a switchable power supply. Set for 120 VAC in the USA
• Appropriate Ethernet cabling (CAT 5)
• Serial or parallel printer(s) with the proper cabling. The
MIL-3000FTX is shipped with a 3 ft. parallel port cable
• Four rubber feet to keep the print server from sliding.
These are also included in the packaging
Contact Digi LAN technical support (see Appendix B) if you
are missing an item(s) from the packaging.
