Digi DT500 User Manual Download Page 10

CARE OF YOUR STOPWATCH: 
 

WATER-RESISTANCE 

The  stopwatch  is  designed  to  withstand 
accidental  contact  with  water  such  as 
splashes  or  rain,  but  it,  is  not  designed 
for  use  in  water.  Do  not  operate  the 
buttons when the stopwatch is wet. 

TEMPERATURE 

Do not leave your stopwatch under direct 
sunlight  or  in very  high  temperatures  for 
a  long  time,  or  the  display  may  become 
black.  Do  not  leave  your  stopwatch  in 
very  low  temperature  as this may  cause 
a slight time loss or gain and the change 
of  digits  becomes  slow.  In  both  cases 
the  above  conditions  will  be  corrected 
when  the  stopwatch  returns  to  normal 
temperature. 

 
SHOCKS 

Be careful not to drop your stopwatch or 
hit  it  against  hard  surfaces  as  it  may 
cause mechanical damages. 

STATIC ELECTRICITY 

The  integrated  circuit  in  your  stopwatch 
can be affected by static electricity. If the 

static  electricity  is  very  strong  a 
permanent  damage  can  occur.  Be 
careful  of  the  screen  of  the  TV  set  and 
the wearing of clothing made of synthetic 
materials in dry weather; in such cases a 
very  strong  static  electricity  can  be 
generated. 

MAGNETISM 

Not affected. 

CHEMICALS 

Do  not  expose  your  stopwatch  to 
solvents  such  as  gasoline  and  alcohol, 
spray  of  cosmetics,  cleaners,  paints  etc 
as  they  may  cause  damage  to  the 
stopwatch. 

BATTERY CHANGE 

When the battery low indicator lights up, 
battery replacement is necessary. 

1. Unscrew and remove the back cover. 

2. Unscrew the battery contact. 

3.  Replace  with  fresh  Lithium  battery 
CR2032 or equivalent. 

4.  Before  putting  in  the  fresh  battery 
makes sure that the triangular contact is 
in the triangular slot under the battery. 

5.  Use  a  small  metal  tool  (such  as  a 
tweezers or screw driver) to momentarily 
short  circuit  the  AC  pad  next  to  the 
battery. 

6. Re-screw the back cover. 
Trouble shooting 

If  the  stopwatch  is  out  of  service,  such 
as  wrong  logic,  frozen  display  etc.,  a 
reset  may  recover  the  stopwatch.  To 
reset the stopwatch, please press all four 
buttons  simultaneously  for  about  2 
seconds  until  the  display  become  blank, 
the  stopwatch  will  return  to  the  default 
state when you release the 
buttons. 

 

THE WARRANTY DOES NOT 

COVER THE BATTERY. 

 

 

Summary of Contents for DT500











Reviews: