Digi DS-470, Operation Manual

Page: 15 / 34

12
5.6.4. Programming Of Minimum And Maximum Range By Weighing Target Weight
Indicators 1 : €  2 : NET 3 : Î gh
INDICATORS DISPLAY TASK OPERATION
1 2 3 WEIGHT MIN MAX
Weighing mode
••••
0.000 0 0
1. Place target weight on the
platter. (Ex. The target weight is
0.620 lb.)
••••
0.000 0 0
2. Press % key. [%] •••• P 0 0 0
3. Press minimum weight percent
by using numeric keys. ( Ex.
10%)
[1] [0] ••••
P 10 0 0
4. Press MIN key to set the
minimum value. (Ex. 0.620 x
(100% - 10%) = 0.558)
[MIN]
•••• P 10 0.558 0
5. Press maximum weight
percent by using the numeric
keys. (Ex. 15%) [1] [5] •••• P 15 0.558 0
6. Press MAX key to the
maximum value. (Ex. 0.620 x
(100% + 15%) = 0.713)
[MAX] ••••
P 15 0.558 0.713
7. Press % key to enter weighing
mode. •••• 0.000 0.558 0.713
5.7. Check Weighing Operation
5.7.1. Using full container
Indicators 1 : €  2 : NET 3 : Î gh
INDICATORS
DISPLAY TASK OPERATION
1 2 3 WEIGHT MIN MAX
Weighing mode. (from previous
step) •••• 0.000 0.558 0.713
1. Place full container on scale 1.595 0.558 0.713
2. Enter tare weight with numeric
keys. (Ex. Tare 0.900 lb.) [9] [0] [0 ] as
shown in 5.3.1.
•••• 0.900 0.558 0.713
3. Subtract tare weight.
[T] as shown in
5.3.1.
••••
0.695 0.558 0.713
3. If
weight is within the target range
the set points will operate as
shown on page 19.
•••• 0.695 0.558 0.713
4. Once weight has been
checked remove container of
parts. •••• 0.000 0.558 0.713
All manuals and user guides at all-guides.com