Installation Manual
4
INSTALLATION INSTRUCTIONS
1. Clean PTO shaft with wire brush where applying target and wipe down
with cleaning agent.
2. Peel off adhesive backing on target.
3. Attach target, adhesive side down, securely to PTO shaft with hose
clamp as shown in Figure 2. Place hose clamp screw head inside
target as shown in Figures 2 and 3.
Figure 2: Target Installation
Important:
The installation diagrams show safety shields removed in order to show additional
details. Never operate equipment without safety shields in place. Adding the target to a rotating
shaft may require additional shielding and is not provided. Consult your original equipment
manufacturer.
Hose Clamp Screw Head
Rotation Counter Sensor
Mounting Bracket
Target
Hose Clamp
PTO Shaft
Rotation Counter
Sensor
