22
Battery Installation
WARNING: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the
battery cover.
1. Turn power off and disconnect the test leads from the
meter.
2. Open the rear battery cover by removing the screw using
a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the cor-
rect polarity.
4. Put the battery cover back in place. Secure with the
screws.
WARNING: To avoid electric shock, do not operate the
meter until the battery cover is in place and fastened
securely.
Note: If your meter does not work properly, check the fuses
and batteries to make sure that they are still good and that
they are properly inserted.
1065DGMAN_20250-64_Rev1.indd 22
07/02/2019 11:23:03 AM
