14
Temperature Measurements
1. Set the rotary function switch to the green Temp position.
2. Insert the temperature probe into the input jacks, making sure
to observe the correct polarity.
3. Press the MODE button to indicate °F or °C.
4. Touch the temperature probe head to the part whose tempera-
ture you wish to measure. Keep the probe touching the part
under test until the reading stabilizes (about 30 seconds).
5. Read the temperature in the display.
Note: Temperature probe is fitted with a type K mini connector.
Mini connector to banana connector adapter is supplied for
connection to the input banana jacks.
Autoranging/Manual Range Selection
When the meter is first turned on, it automatically goes into
autoranging mode. This automatically selects the best range for the
measurements being made and is generally the best mode for most
measurements. For measurement situations requiring that a range
be manually selected, perform the following:
1. Press the RANGE key. The “AUTO” display indicator will
turn off.
2. Press the RANGE key to step through the available ranges
until you select the range you want.
3. To exit the manual ranging mode and return to autoranging
mode, press and hold the RANGE key for 2 seconds.
Note: Manual ranging does not apply for the Frequency functions.
MAX/MIN Function
Note: When using the MAX/MIN function in autoranging mode,
the meter will “lock” into the range that is displayed on the LCD
when MAX/MIN is activated. If a MAX/Min reading exceeds that
range, an “OL” will be displayed. Select the desired range BEFORE
entering MAX/MIN mode.
1065DGMAN_20250-64_Rev1.indd 14
07/02/2019 11:23:03 AM
