15
1. Press the MAX/MIN key to activate the MAX/MIN recording
mode. The display icon “MAX” will appear. The meter will
display and hold the maximum reading and will update only
when a new “MAX” occurs.
2. Press the MAX/MIN key again and the display icon “MIN” will
appear. The meter will display and hold the minimum reading
and will update only when a new “MIN” occurs.
3. To exit the MAX/MIN mode, press and hold the MAX/MIN key
for 2 seconds.
Switching on Bluetooth
®
and Sending Measurements
Press and hold REL button until the Bluetooth symbol appears in
the display. Then you can use our D/S Meter App installed on your
phone to connect with the instrument.
Switching off Bluetooth
Press and hold REL button to switch off Bluetooth. The Bluetooth
connectivity switches off as soon as the meter is switched off.
Relative Mode
The relative measurement feature allows you to make measure-
ments relative to a stored reference value. A reference voltage,
current, etc. can be stored and measurements made in compari-
son to that value. The displayed value is the difference between
the reference value and the measured value.
1. Perform the measurement as described in this manual.
2. Press the REL button to store the reading in the display and the
“REL” indicator will appear on the display.
3. The display will now indicate the difference between the stored
value and the measured value.
4. Press the REL button to exit the relative mode.
Note: The Relative function does not operate in the
Frequency function.
1065DGMAN_20250-64_Rev1.indd 15
07/02/2019 11:23:03 AM
