17
2. Insert the black test lead banana plug into the negative
COM jack and the red test lead banana plug into the
positive CAP jack.
3. Touch the test leads to the capacitor to be tested. The
display will indicate the proper decimal point, value, and
symbol.
Temperature Measurement (Model 20250-51 only)
WARNING: To avoid electric shock, disconnect both
test probes from any source of voltage before mak-
ing a temperature measurement.
1. If you wish to measure temperature in °F, set the rotary
function switch to the Temp °F range. If you wish to
measure temperature in °C, set the rotary function
switch to the Temp °C range.
2. Insert the type K thermocouple probe black test lead
banana plug into the negative COM jack and the red test
lead banana plug into the positive Temp jack.
3. Touch the temperature probe head to the part whose
temperature you wish to measure. Keep the probe
touching the part under test until the reading stabilizes
(about 30 seconds).
4. Read the temperature in the display. The digital reading
will indicate the proper decimal point and value.
WARNING: To avoid electric shock, be sure the
thermocouple has been removed before changing to
another measurement function.
1065DGMAN_20250-50, -51 Digi-Sense Compact Multimeter.indd 17
8/15/2017 8:23:18 AM
