Digga TPE-000039 Operator'S Manual Download Page 8

8

PM-000134  - Telescopic Piling and Drilling Extension Operators Manual - September 2015

4       SAFETY PRECAUTIONS - GENERAL INFORMATION

WARNING

WARNING

WARNING

OPERATING THE TELESCOPIC PILING AND DRILLING EXTENSION

•  An operator must not use drugs or alcohol, which can change his or her alertness or coordination. An operator taking  

prescription or over-the-counter drugs should seek medical advice on whether or not he or she can safely operate 
equipment. 

•  All bystanders should be kept a minimum of 20 feet (6 meters) away from the working area of the drive. 
•  Do not allow Site workers to climb or ride on a Telescopic Piling and Drilling Extension, Planetary Drive, Auger or 

Auger Extension at any time, including while stationary, in operation or being moved or rotated.

•  Operate only from the operator’s station. 
•  Avoid steep hillside operation which could cause the machine to overturn. Consult your machines operator’s and 

safety manuals for maximum incline allowable. 

•  Reduce speed when driving over rough terrain, on a slope, or turning, to avoid overturning the vehicle. 

•  Travel only with the planetary drive in a safe transport position to prevent uncontrolled movement. Drive slowly over 

rough ground and on slopes.  

•  Tether any auger, anchor or extensions connected to the drive with a chain if necessary, to prevent uncontrolled 

swinging of the attachments when moving from position to position. 

•  Do not drive close to ditches, excavations, etc., cave in could result. 
•  Before exiting the machine, lower the attachment to the ground, apply the parking brakes, turn off the machine’s       

engine, and remove the key. 

•  Flow and pressure gauges, fittings, and hoses must have a continuous operating pressure rating of at least 25% 

higher than highest pressures of the system.

•  Do not smoke when refueling the machine. Allow room in the fuel tank for expansion. Wipe up any spilled fuel. Secure 

cap tightly when done. 

•  Remove the Telescopic Piling and Drilling Extension from the machine before transporting to and from the job site. 
•  The Telescopic Piling and Drilling Extension shall be used only for their designed intent and shall not be loaded 

beyond their rated capacity. Overloading or exceeding the manufacturers specifications will void all warranty.

Summary of Contents for TPE-000039
























Reviews: