Digga PR3843, Installation, Operating And Troubleshooting Manual, Page: 9 / 32

TORQUE HUB INSTALLATION
1 .
Attach the harness to
the back of the display,
making sure the male and
female pins line up and
the connectors are tight .
2
.
Securely mount the display
using the magnet or suction
cup assembly. Try to point the
back of the display so it's
facing the hub .
3
.
If your unit comes with an
antenna. Make sure it is not
adjusted and laying down in
the horizontal position. Also
make sure the antenna is not
damaged, crushed or covered
in clay or grease.
9
PM-000 199 September 2019