Digga PR3843, Installation, Operating And Troubleshooting Manual, Page: 18 / 32

DIGGA 7” DISPLAY OPERATING GUIDE
Setting Target/Optimum Torque/Torque Range
1. On the main screen, touch anywhere
in the circle on left to Zero calibration,
then click Zero calibration, this may
take up to 20 seconds.
2. To Set the Torque Range Selector
Touch anywhere on the live torque
dial indicator Main screen to bring up
the Range
Use the arrow keys to set the desired
range. Press close
3. To set the target Torque
On main screen touch anywhere in
the circle on the left, click Set target
torque, enter desired Torque.
Touch Set target torque, touch close
When target is reached the indicator
will turn green.
N ote : If the torque shows a non-zero
value when the drive is hanging free,
user may press ZERO CALIB to calibrate
the display. This may take a few
seconds.
18
PM-000 199 September 20 19