Digga HP450, Operator'S Manual, Page: 11 / 37

GENERAL INFORMATION
DECALS
DECAL PLACEMENT
The diagram on this page shows the location of the decals used on the
Road Profiler
.
The decals are identified by their part numbers, with reductions of the actual decals located on
the following pages. Use this information to order replacements for lost or damaged decals. Be
sure to read all decals before operating the attachment. They contain information you need to
know for both safety and product longevity.
IMPORTANT
: Keep all safety decals clean and legible. Replace all missing, illegible, or damaged
safety decals. When replacing parts with safety decals attached, the safety decals must also be
replaced.
REPLACING SAFETY DECALS
: Clean the area of application with nonflammable solvent, then wash
the same area with soap and water. Allow the surface to fully dry. Remove the backing from the safety
decal, exposing the adhesive surface. Apply the safety decal to the position shown in the diagram
above and smooth out any bubbles.
SERIAL NUMBER
TAG LOCATION
MODEL NUMBER
#40113
#40149
#40149
#40161
#40719
#4468
#40161
MODEL NUMBER
#4468
#40161
#40118
#40723
#40722
#41043
#40151
OPERATION CONTROLS
PM-000068-A DECEMBER 2017
9