7
4. Settings
Material damage
Check the device carefully for damage before use!
Observe the type plate. The specifi ed voltage must match the mains
voltage.
During initial start-up, there may be a temporary development of
odors.
5. Cleaning, care and maintenance
• Disconnect the device from the power supply before cleaning.
• Clean the device only when it has cooled down.
• You must not wash or dry clean the device.
• Do not use corrosive cleaning agents.
6. Troubleshooting
Problem
Cause
Solution
The device does not get warm.
No voltage is applied.
Check whether the mains connection
has been made correctly. Check the
circuit breaker and the fuse in the house
installation.
If you cannot correct the cause, please call your point of sale.
