![DIG LEIT X Series Instruction Manual Download Page 21](http://html1.mh-extra.com/html/dig/leit-x-series/leit-x-series_instruction-manual_2496026021.webp)
Passwords screen provide the user a security against
unauthorized changes being made to the system. The Default
password is AAA. If the password has not been changed
press
to continue. If the password has been changed, enter the new password to continue. To
change a password scroll to Change a Password screen at the end of Setup System. To enter the new
password press
or
and underscore the digit to be changed, then press
or
to select the
appropriate letter. Repeat the steps for each letter. When finished, press
or
to underscore OK.
Press
to continue.
This screen displays the current time. To set the time, underscore
the hour digits using
or
and press
or
to
change the value of the appropriate digit. Press
to move to
the next digit. If needed, repeat the steps for the minutes and AM/PM digit. After setting the time, press
or
again to underscore OK. Press
to continue.
To set the date, underscore the appropriate digits using
or
and press
or
to change the value of the
appropriate digit. Press
to move to the next digit and if
needed, repeat the steps. After setting the calendar. Press
or
again to underscore OK. Press
to continue.
NOTE:
Scheduled programs will not run unless the
appropriate program number is activated and a checkmark
appears in the Active Program box.
In this screen, up to 4-programs can be activated or deactivated. Program #01 is active (checked) by default.
To enable the controller to activate or cancel any of the stored programs simply add or remove the
checkmark. Press
or
to underscore the program number press
to activate (checked) and
to deactivate. Repeat the steps to activate and deactivate additional programs as needed. Press
or
again to underscore OK. Press
to continue.
This screen presents an option to shut-off irrigation for any month
of the year. All the months are active and No is selected by
default. To select press
or
to underscore YES, then
press
to select. Press
or
again to underscore OK. Press
to continue.
If Yes is selected in the above screen then, this screen shows the
months of the year active (checked). To deactivate any month,
press
or
to underscore the appropriate month and
press
to deactivate (remove the checkmark). To enable the
21
Password: AAA
s
t
s
t
s
t
Time: 12:04 am
s
t
s
t
s
t
s
t
s
t
Date: 01/01/00
s
t
s
t
s
t
s
t
s
t
s
t
Active 1 2 3 4
Progs:
4
Turn Month OFF
Yes
l
No
Active J F M A M J
Months:
444444