6
Do not operate the charger in a closed-in area or restrict the
4.5
ventilation in any way.
DC CONNECTION PRECAUTIONS
5.
Connect and disconnect the DC output clips only after setting
5.1
all of the charger switches to the “off” position (if applicable) and
removing the AC plug from the electrical outlet. Never allow the
clips to touch each other.
Attach the clips to the battery and chassis, as indicated in
5.2
sections 6 and 7.
fOLLOW ThESE STEPS WhEN BATTERY IS INSTALLED
6.
IN vEhICLE
A SPARK NEAR ThE BATTERY
MAY CAUSE A BATTERY
EXPLOSION. TO REDUCE ThE
RISK Of A SPARK NEAR ThE
BATTERY:
NEgATIvE gROUNDED SYSTEM
Position the AC and DC cables to reduce the risk of damage
6.1
by the hood, door and moving or hot engine parts. NOTE: If it
is necessary to close the hood during the charging process,
ensure that the hood does not touch the metal part of the battery
clips or cut the insulation of the cables.
Stay clear of fan blades, belts, pulleys and other parts that can
6.2
cause injury.
Summary of Contents for 28.71219
Page 2: ......
