DieHard 28.71219 Operator'S Manual Download Page 5

2

IMPORTANT SAfETY INSTRUCTIONS - SAvE ThESE 

1. 

INSTRUCTIONS - 

This manual contains important safety and 

operating instructions

RISK Of ELECTRIC ShOCK OR fIRE.

Keep out of reach of children.

1.1 

Do not expose the charger to rain or snow.

1.2 

Use only recommended attachments. Use of an attachment 

1.3 

not recommended or sold by the battery charger manufacturer 

may result in a risk of fire, electric shock or injury to persons or 

damage to property.
To reduce the risk of damage to the electric plug or cord, pull by 

1.4 

the plug rather than the cord when disconnecting the charger.
An extension cord should not be used unless absolutely 

1.5 

necessary. Use of an improper extension cord could result in a 

risk of fire and electric shock. If an extension cord must be used, 

make sure:

That the pins on the plug of the extension cord are the same 

• 

number, size and shape as those of the plug on the charger.

That the extension cord is properly wired and in good  

• 

electrical condition.

That the wire size is large enough for the AC ampere rating of 

• 

the charger as specified in section 8.

To reduce the risk of electric shock, unplug the charger from the 

1.6 

outlet before attempting any maintenance or cleaning. Simply 

turning off the controls will not reduce this risk.
Do not operate the charger with a damaged cord or plug; have 

1.7 

the cord or plug replaced immediately by a qualified service 

person. (Call customer service at: 1-800-732-7764.)
Do not operate the charger if it has received a sharp blow, been 

1.8 

dropped or otherwise damaged in any way; take it to a qualified 

service person. (Call customer service at: 1-800-732-7764.)

Summary of Contents for 28.71219





















Reviews: