Operation
4.3.2.1.1
4.3.2.1.1
Opening the safe door (with factory setting)
Frontload systems only
1.
Open the front door or the standard/design door depending on the system used (refer to the sys-
tem-specific operating manual, chapter "Basic operation").
2.
Activate the product-specific software (see system manual, chapter "Basic operation", section "Call-
ing up product-specific software").
3.
Call up the function for the measure you require on .
NOTE
If the safe is connected to an alarm system, opening the safe or discarding the number
combination may be blocked. In this case, you will have to disarm the intruder alarm sys-
tem first.
Indexes on the number combination lock
0
90
8
0
7
0
60
50
40
3
0
2
0
10
1
2
1 = Changing index
2 = Opening index
Setting the number combination on the number combination lock
NOTE
Turn the dial slowly and steadily. Never use force and do not turn the dial backwards. If
you turn past a number in the combination, you will have to re-dial the entire combination.
Do not count the number of turns but the number of times the numbers appear below the
opening index.
The number combination lock is preset at the factory.
Copyright © 2021, Diebold Nixdorf
01750337284 C
4-11
