Planning the installation
18
CINEO C4060 (RM4H) - Supplementary Instruction
01750308102 A
3 Planning the installation
This chapter provides specific information regarding the installation
procedure for the CINEO C4060 with an RM4H unit. The basic information
for installing the device is described in the installation manual of the
CINEO C4060 (order number: 01750178009).
NOTICE
Damage to the device due to improper climatic environmen-
tal conditions during storage and installation
From the time of installation up to the start-up of the device, the climatic
environmental conditions for storage must be met (see chapter "Appen-
dix"). Make sure that the values are neither higher nor lower than the
specified values to prevent irreparable damage to the device. In the event
of non-compliance, Wincor Nixdorf International GmbH shall not assume
liability for any damage that is caused to the device.
3.1 Device dimensions
The dimensions of the CINEO C4060 (RM4H) and the CINEO C4060 are
identical.
NOTICE
All dimensions are specified in millimeters (inches). The views of the sys-
tems are not drawn to scale.