manualshive.com logo in svg

DIEBOLD NIXDORF CINEO C4060, Installation & Operating Manual, Page: 11 / 72

Share
Download
DIEBOLD NIXDORF CINEO C4060 Installation & Operating Manual Download Page 11

Safety

01750308102 A

CINEO C4060 (RM4H) - Supplementary Instruction

11

– To clean the device only use cleaning agents approved by Diebold

Nixdorf (see chapter "Cleaning, Service and Maintenance" in the oper-
ating manual).

– Components with adjustable light effects are integrated in this product.

Repetition frequencies between 5 Hz and 40 Hz should be avoided as
certain light frequencies or flickering light sources can cause epileptic
seizures in some individuals. 
Also avoid light reflections and synchronize the cycles wherever possi-
ble. Ensure that monitors' refresh rates are as high as possible.

Repairs

DANGER

Repair work may be carried out only by authorized specialist staff. Unau-
thorized opening of the device or repair work carried out improperly
could result in considerable danger to the user. In case of noncompliance,
Diebold Nixdorf excludes all liability. Wincor Nixdorf International GmbH

Summary of Contents for CINEO C4060









































































Reviews:

No comments