Safety
10
CINEO C4060 (RM4H) - Supplementary Instruction
01750308102 A
DANGER
In case of an emergency (e.g. damaged cabinets, controls or power ca-
bles, liquids or foreign objects in the device) take the following steps:
Switch the device voltage-free immediately by:
1. Switching off the automatic circuit breaker or removing the fuse insert
from the fuse holder in the distributor box of the house installation.
2. Disconnecting the plug of the power supply cable from the grounded
socket in the building installation.
3. Interrupting the power connection between the UPS (uninterruptible
power supply) and the device (see chapter "Introduction", section
"General power interrupt" in the operating manual);
4. For further system-specific notes, please refer to the operating manu-
als.
5. Inform the customer service responsible for you.
– Never connect or disconnect data transmission lines during a thunder-
storm.
– Always keep the device’s ventilation openings free from obstruction to
ensure proper ventilation and to prevent malfunctions resulting from
overheating.
– Only use accessories and extension components that have been ap-
proved by us. Nonobservance can result in damage to the system or vi-
olations of regulations concerning safety, radio interference and er-
gonomical requirements.
– Note that there are only safety extra-low voltage circuits (SELV circuits)
if you want to feed voltage from an external source into prepared ca-
bles to install additional electronics (e. g. EMA connection).