DIEBOLD NIXDORF BEETLE /iSCAN EASY, User Manual, Page: 9 / 120

BEETLE /iSCAN EASY User Manual
3

In case of an accident (such as a damaged housing, entry of liquids or foreign
objects), switch the device off and use the separator to completely remove the
device from power.

BEETLE /iSCAN EASY is the result of state-of-the-art technology. Therefore, please
also ensure that the BEETLE /iSCAN EASY is operated under modern building and
technical conditions in order to ensure flawless and efficient operation. The
appliance and other information technology hardware should only be connected to
electrical supply networks with a separate protective earth wire (PE). This type of
electrical supply network is referred to as a TN-S network. Do not use PEN
conductors. Also follow the recommendations set forth in DIN VDE 0100 Part 540,
Appendix C2 as well as EN50174-2, §5.4.3., the National Electrical Code ANSI/NFPA
70-2005 and the Canadian Electrical Code, Part I, CSA C22.1-02.

When working on the cutter of the printer, the device must be turned off.

Always keep the ventilation slots free of obstruction to ensure adequate air
circulation and avoid overheating.

Transport the appliance only in its original packaging (to protect it against knocks and
bumps).

Batteries must be disposed of according to local regulations on the disposal of special
waste.

Connecting Peripherals
Use only shielded cables when connecting devices to the system to ensure
compliance with international Rules and Regulations for radiated emission as well as
to achieve a high immunity against external disturbances.