Storage Media
12.2
12.2 Coffee Lake (R3/R4 motherboard)
12.2.1
12.2.1 Replacement of Solid State Disk
1.
First, ensure that the device is switched off and the power connector is disconnected.
Figure 12-7:
Removing the cable connection cover
2.
Remove the display from the stand, and lay
it on a flat surface.
3.
Remove the cable connection cover at posi-
tion (1) by pulling it downwards (see arrow)
to uncover the connector panel.
4.
Detach all connectors from the connector
panel.
Figure 12-8:
Releasing the back cover
5.
Lift up and turn the 2 knobs (1) counter-
clockwise to release the back cover (2) from
the display by pulling it downwards.
CAUTION
Risk of damage to cables
Presence of cables connecting the con-
troller module to the display module.
Due to limited length of the connecting ca-
bles, care
must
be taken when removing
the controller module from the display
module to avoid damaging these cables.
Copyright © 2021, Diebold Nixdorf
01750342843C
12-4
