27
Digital Miniatur
e Car
d Reader T
ools
Download the Application Code:
Perform the following steps to download the new application code from the
M card to your Walkabout Express digital portable.
1
Remove the power supply from the Walkabout Express portable. That is,
make sure that you have unplugged the AC adapter, removed the portable
from its charging station, and/or removed the battery pack from the back of
the unit. (See the Walkabout Express Operating Instructions for details.)
2
. Insert the 2-Megabyte M Card with the new application code (copied
during the previous procedure) into the portable.
3
Simultaneously press the Menu and Backlight buttons on the portable
while you reapply power to the unit (e.g., reinsert the AC adapter or the
battery pack).
4
The message USER DWNLOAD REQUESTED! will appear on the
portable’s display screen. (You no longer need to press the Menu and
Backlight buttons at this point.) A few seconds later, a DOWNLOAD
REQ screen will appear. Press the left softkey on the front of the portable
to select the MCARD option.
5 The message MCARD VALID should appear on the portable’s display
screen. (If it does not, check to make sure that you inserted the correct M
card with the new application code.) Press the left softkey to select the
LOAD option and begin the software download.
6
The message DOWNLOAD IN PROGRESS will appear on the portable’s
display screen for approximately 20 seconds, while the download is
taking place. After the download is complete, DOWNLOAD
COMPLETE will flash on the screen, followed by "REMOVE MCARD
PLEASE…". Remove the M card from the portable, and the unit will
automatically reset (or reboot) itself using the new application code.
7
Place an M card that you want to use for dictation in the unit. Use the
SET functions to select M card Format. Please note that any data on the
M card will be removed during the Format procedure.