Dicota BlueLight, User Manual

Page: 5 / 90

Note:
If unused for more than 10 minutes, the mouse will change to battery
saving mode. In this case double click the left button to reactivate the
mouse. Once connected, after you remove the dongle or turn off the
computer, double clicking the left button will reactivate the mouse.
Also, if you press the Connect Button inadvertently or some other dis-
connection occurs during use, please reconnect the mouse. If this is not
available, please open the Bluetooth Dongle Software window, delete or
disconnect the mouse (as the picture shows), then reconnect.
If you are using the Widcomm Bluetooth ® Software, click the right button
of the mouse and select “Status”, then you can check the power status
of the batteries and setup alarm for shortage of battery.
B: Match on Microsoft built-in software
1. Make sure that the Bluetooth ® function has been activated in your
Notebook or PC. Double click the Bluetooth icon on the Task Bar or
in the Control Panel, open the “Bluetooth Management” window, click
“Add”, and tick on “facility is ready for searching”, click “Next”.