MXS-9100 Optical Switch Rackmount Operation Manual
91592 Rev. A2
June 21, 2019
6
2. Product Overview
Introduction
Optimized for use with EXFO systems and software control via SCPI over ethernet, the MXS-
9100 utilizes DiCon Fiberoptics’ industry proven MEMS optical switch technology to reliably
connect fibers together in a fully automated maner.
Available as a MxN matrix optical switch, or as an array of multiple 1xN optical switches, the
MXS-9100 is the perfect solution for sharing centralized instruments or automated tests in
manufacturing.
Electrical Specifications
Parameter
Specification
Supply Voltage
AC 100-240V, 50/60Hz
Switch Latching Type
Non-latching
Control Type
Ethernet Interface and SCPI Command Set
Ethernet Interface
Control via the Perle IOLAN DS1 Device Server,
RJ45 receptacle on the rear panel
Front Panel Power Status LED
LED will be lit up when power is turned on
Equipment Ratings
Parameter
Specification
Operation Temperature
0
o
C to 50
o
C (32
o
F to 122
o
F)
Storage Temperature
-20
o
C to 60
o
C (-4
o
F to 140
o
F)
Relative Humidity
0% to 80% non-condensing
Maximum Operation Altitude
2,000 m (6,561.68 ft)
Pollution Degree
2
Overvoltage Category
II
Input Power
AC 100-240 V (Not exceeding ±10% of the nominal voltage);
50/60 Hz; 2 A/1 A
