MXS-9100 Optical Switch Rackmount Operation Manual
91592 Rev. A2
June 21, 2019
5
1. Safety Information
General Safety Information
WARNING
➢
Do not install or terminate fibers while a light source is active. Never look directly into
a live fiber and ensure that your eyes are protected at all times.
➢
To use of controls, adjustments and procedures other than those specified herein
may result in exposure to hazardous situations or impair the protection provided by
this unit.
IMPORTANT
When you see the following symbol on your unit
, make sure that you understand and
meet the required condition before using your product.
Electrical Safety Information
WARNING
➢
Ensure that your power supply is properly grounded and that the power cable and
power supply are compatible with the unit.
➢
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
➢
All wiring and installation must be in accordance with local building and electrical
codes acceptable to the authorities in the countries where the equipment is installed
and used.
➢
Use only the certified power cord that is suitable rated for the country where the unit
is sold.
➢
Use this unit indoors only.
➢
Operation of any electrical instrument around flammable gases or fumes constitutes a
major safety hazard.
➢
To avoid electrical shock, do not operate the unit if any part of the outer surface
(cover, panels, etc.) is damaged.
➢
Consideration should be given to the connection of the unit to the supply circuit and
the effect that overloading of the circuits might have on over-current protection and
supply wiring. Appropriate consideration of equipment nameplate rating should be
used when addressing this concern.
➢
To avoid the potential for an electrical shock hazard, you must reliably connect an
earth ground conductor to the unit. Ensure to ground the unit using a grounding
method that complies with your local regulations.