DiBoss lt-23q5lfh, Owner'S Manual

Page: 24 / 32

22 24
Antenna connection
1. Connect RF out on the VCR to the
Antenna input on the rear of the TV.
2. Connect the antenna cable to the
antenna in jack on the VCR.
3. Press the TV/AV button to select
Antenna Input source.
4. Press the PLAY button on the VCR.
COMPONENT INPUT
1. Connect the COMPONENT output sockets
(Y Cb Cr/Y Pb Pr) of the exterior equipment to
the COMPONENT INPUT sockets of the set.
2. Connect the audio cable from the exterior equipment
to the COMPONENT INPUT sockets of the set.
3. Press the TV/AV button to select
COMPONENT the screen.
4. Press the PLAY button on the DVD.
The COMPONENT playback picture appears on the screen.
Note . The COMPONENT mode is available in the 576i, 480P, 720P and 1080i signal.
S-VIDEO Input
If using an S-VIDEO source, the picture quality
will be improved over a video source.
1. Connect the S-VIDEO output of a VCR to the
S-VIDEO input on the TV.
2. Connect the audio cables from the S-VIDEO VCR
to the L R inputs on the TV.
3. Select S-VIDEO mode by pressing the
TV/AV button repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
External Equipment Connection
VCR
Pb(Cb)
Pr(Cr)
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
VCR
YL
(MONO)
R
Pb(Cb)
Pr(Cr)