DiBoss lt-23q5lfh, Owner'S Manual

Page: 20 / 32

Radio Control
20
This function is possible only when the set is in Radio mode.(Radio mode is displayed
when the Setting for special menu is radio On.)
1. Use TV/AV button on remote controller to select
Radio mode .
2. Press the MENU button to set Radio Setup menu.
3. Press the
Ïq
button repeatedly to select
Mode Auto or Manual .
* When the Radio Setup Mode is Auto , only the
programmes stored in memory are selected.
* When the Radio Setup Mode is Manual , all frequencies
are selected.
4. Press the PR
xy
button select Frequency .
Then press the
Ïq
button repeatedly to tune in the
desired station manually. If you press the
Ïq
button
continually above 2 seconds, It automatically changes
present frequency into next frequency.
5. Press the PR
xy
button to select Programme .
Then press the
Ïq
button repeatedly to select
programme.
6. Press the PR
xy
button to select memorize . If you want
to memorize this radio setup, press the
Ïq
button.
7. Press the PR
xy
button to select Delete . Select Off
with the
Ïq
button to delete the station.
8. Press the PR
xy
button to
select Auto Programme .
9. Press the
Ïq
button
repeatedly to automatically
scans and tunes to the next
available station.
10. Press the PR
xy
button to
select Off Time. Then press the
Ïq
button repeatedly to
select Off, 5, 10, 30(minutes).
The on-screen displays disappear
after time selected.(when you
select Off, the on-screen displays
will not disappear.)
The displays identifies the
status of radio settings.
11. Press the PR
xy
button to
select Edit Name .
Then press the
Ïq
button to edit radio name.
12. You can assign a radio
name with 8 characters.
Press the
PR
xy
button repeatedly. You can use the
numeric 0 to 9, the alphabet A to z(capital and small letters.) and a blank.
With the
Ïq
button, you can select in the opposite direction.
13. Press the MENU button to return to prior menu.
14. Press the TV/AV button to exit. Then the radio setting
condition is displayed.
Note. If you want to listen to the radio, the ANT.jack must be connected to the
antenna input of the set.
And Radio function is available when the setting for Special menu is Radio On.
Position :▲▼ adjust :◀▶
Exit : TV/AV
Mode Auto
Frequency 87.5 MHz
Programme 1
Memorize
Delete
Auto Programme
▶
Off Time Off
Edit Name ▶
Name --------
Radio Setup
Start :◀▶
Back : MENU Exit : TV/AV
Start
Radio Auto Programme
Adjust : ▲▼◀▶ Confirm: OK
Back : MENU Exit : TV/AV
Radio Name Edit
▲
Station P01 --------
▼