EN
aCTIVaTIon
DiBO 28
TRAILER
1
Coupling the tow ball coupling:
• Move the ball coupling over the trailer device.
• open and hold the ball coupling.
• Turn the jockey wheel handle clockwise until the ball coupling locks in place.
• Continue to turn the jockey wheel handle until the wheel is fully retracted.
The support shoe must be firmly engaged in the recess in the outer tube.
• open the clamp.
• pull the jockey wheel upwards as far as possible.
• Tighten the clamp.
• Connect the power cable to the towing vehicle.
• Route the breakaway cable through the breakaway cable guide ring and
loop it around the ball plate (see photos - see also the applicable country
regulations for potential possibilities through coupling!).
Caution at option 2:
Do not use with removable coupling! If the coupling is
not correctly locked in position, there is a risk of losing the coupling and the
trailer.
Caution at option 4
: only permissible with DIn 5299 snap hooks - min. 70 (fire
brigade snap hooks).
• Release the hand-brake lever.