DiaSys O MINI Operator'S Manual Download

Page: 3 / 27

Omini o

perator’s

manual

version :19.04.17

AFETY

NFORMATIONS

Read the safety information before installing the water purifier

2.1

ARNING LABELS

Before reading the manual, please get familiarized with the following icons used in this manual.

Electric Shock

Warnings

2.2

AFETY INSTRUCTIONS

To ensure the product SECURITY and RELIABILITY, all repairing must be realized with spare parts
available with our after-sales service. If the power cable is damaged, it must be replaced.

Unplug the water purifier power plug. Don’t pull on the wire.

Before all maintenance on the water purifier, turn off the power supply switch and
unplug the power plug.

Use exclusively tap water to supply the water purifier.

- MAXIMUM NETWORK PRESSURE = 6 BARS

- Maximum supply water temperature = 38 °C.

This water purifier needs a main tension 230 volts ~ / 50 Hz.

Don’t connect too much instruments on the same plug in order to not risk fire

or electric shock.

Summary of Contents for O MINI




























Search results

Summary of Contents for O MINI

Reviews:

Related manuals for O MINI

Brands by name

Popular brands

DiaSys O MINI, Operator'S Manual

Search results

Summary of Contents for O MINI

Reviews:

Related manuals for O MINI

Brands by name

Popular brands