40
7.5
Clamp cleaning
We recommend to perform the cleaning of the clamp using a dry cloth and /or brush. Be careful to remove all paraffin
residues
.
7.6
Section waste tray cleaning
We recommen performing the complete cleaning of the section waste tray at the end of each working day. Be careful to
remove all residues.
7.7
Check orientation head
Monthly check if orientation system is binding-free; otherwise, clean it and put grease over orientation half spheres
7.8
Fuses replacement
To replace fuses:
•
Switch the unit off (Picture 53)
•
Open fuses position with light pressure on point shown on Picture 54
•
Remove fuses and check if filament is not interrupted; in that case, replace the fuse with
another one. (For fuses features see par. 2.11)
•
Connect power cable and switch the unit ON
See section “Troubleshooting” in case of malfunction.
If problem persists, contact Diapath S.p.A. or local distributor.
Picture 54
Picture 55
ATTENTION
We suggest a preventive maintenance operation at least once a year.
Picture 53
ATTENTION
Loosen the screw without removing it
1
Picture 52 – Adjustment of orientation head
