|
619-905-9400
9
1
Unplug GFCI power cord.
Push down on the red button
to release vacuum.
Turn blue filter housing
clockwise to remove. Caution:
Filter housing is full of water.
4
Remove and clean string
filter and housing. Do not
misplace the black O-ring.
5
Remove black O-ring
and wipe
the groove clean. Place the
O-ring
back into the groove. If it
appears damaged or crimped,
it should be replaced.
6
Reinsert clean or new string filter,
making sure that it slips down
over the standpipe inside on the
bottom of the blue housing. Refill
with water to top of housing.
7
Reconnect the blue filter housing,
making sure that the string filter
slips over the upper standpipe.
Twist the blue filter housing counter-
clockwise and hand-tighten.
DO NOT OVERTIGHTEN.
8
Make sure the valve handle
is OFF and the faucet nozzle is
aimed into the basin. Plug the
power cord back in.
2
3
MAINTENANCE
Changing the Filter Cartridge in the Big Blue Filter
The big blue filter collects ultra-fine clay particles and should be cleaned at least every 3 months. Eventually, the
pores of the filter cartridge will fill up and the water flow from the spray nozzle will decrease. At that time, please visit
www.DiamondCoreTools.com, call 619-905-9400 or email info
@
diamondcoretools.com to purchase replacement filters.
To change the filter cartridge:
Summary of Contents for CINK
Page 1: ...The CINK User Manual...
