background image

|

   619-905-9400

3

  Read this user manual completely before operating the unit. 

  Follow all instructions and operating procedures. 

  Avoid splashing water in eyes.

  Avoid splashing water on electrical components. 

  Do not allow hoses to become bent or kinked. 

  Do not leave the pump running for extended periods of time. 

  Do not allow the pump to run 

dry

 without water in the system for more than 2 minutes.

  Do not allow the sink basin drain to become plugged while the system is running. 

  Do not plug the drain of The CINK to fill the sink basin to wash parts. 

   

CAUTION:

 Use The CINK only in areas where if water spills it will not damage floors or carpeting, etc. Be aware that 

water may drip from hoses or spill when bucket lids or filters are removed. 

  Position The CINK far away enough from electrical outlets so that water cannot splash on the outlet and plug. 

 

WARNING!

 Do not allow the power cord to lie in standing water at any time.  

  Plug the power cord into a properly grounded, three-prong electric power outlet only. 

  Always use a surge protector. 

  Protect the power cord from being damaged, pinched, bent, stepped on, rolled over, stretched, etc.

 

WARNING!

 Do not use any other electrical appliances on or near The CINK to avoid any shock danger. 

  When performing maintenance on The CINK, unplug the power cord from the electric outlet. 

  Always leave The CINK unplugged during a lightning storm and when it is not in use. 

  To reduce the risk of fire or electric shock, do not expose The CINK to outdoor elements such as rain, snow, etc.

  Remove all water and clay from the entire system before freezing conditions exist. 

  Engage the wheel caster brakes to keep the unit from moving when it is plugged in or is in use. 

  When moving the cart from one location to another: 

  1.  Unplug the power cord from the electrical outlet. 
  2.  Remove all items from The CINK or drainboard. 
  3.  Unlock the locking casters. 
  4.  Move carefully to avoid tipping the unit over. 
  5.  Relock the wheel casters when The CINK is in its new spot. 

  Do not place any objects over 25 pounds on the unit or sit on or stand on this product as the unit may tip over.  

  Objects placed on The CINK may fall, causing injury or damage to the user or to the unit.  

 

  The CINK is to be used only with clean water to clean clay, pottery tools and brushes, slip water buckets, sponges,  

  splash pans, etc. 

(

water-soluble, clay product materials

)

 

WARNING!

 This CINK and system contain NON-POTABLE WATER. 

  DO NOT DRINK THE WATER IN THIS UNIT AND THE SPRAY NOZZLE.

 

CAUTION:

 DO NOT use The CINK for: beverages, food residue, bodily fluids, chemicals, oil-based materials, 

  paints or glazes. The CINK is NOT designed for disposal or filtering of hazardous or biohazardous materials. 

  Do not attempt to connect The CINK to any septic or sewer plumbing systems. 

  Disposal of water and material collected in this system should be in accordance with local laws and regulations.

 

CAUTION:

 Freezing conditions will damage The CINK 

(

see Page 6

).

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

Summary of Contents for CINK















Reviews: