18
1190 S
r
Owner’s Manual
Basic Operation
•
Power On:
Simply start pedaling to wake up the console and start
operation. Before any other keys are pressed, the unit will be in an “idle”
mode.
•
Start a Program:
To begin a workout program, press the “Quick Start”,
“Classic Programs”, or “HR Interactive” program key to select a program.
Then, follow the instructions on the message display to enter your personal
data (Quick Start needs no personal data and will begin immediately).
When finished entering data, press the “Start” key to begin the workout
program. More details about each program are given in the “Workout
Programs” section of this manual.
•
Stop:
To stop a program before it is complete, press the “Stop” key once.
The unit will immediately enter “Cool Down” mode. To skip the “Cool
Down”, press the Stop key again. The unit will enter the Workout Summary
mode.
•
Reset:
To reset a program, press and hold the Stop key for two seconds.
•
Pause and Resume:
To pause a program for up to 5 minutes, simply stop
pedaling. The display will shut off. To resume the program at the point
where you left off, simply start pedaling again within 5 minutes. If the unit is
not pedaled within 5 minutes, the unit will automatically reset and the current
program will be lost.
•
Save a program:
To save the current program into user memory, press and
hold the “User 1” or “User 2” key for two seconds until the data display
shows the message “PROGRAM IS SAVED”. All the current program settings,
including intensity level settings & profiles at various times, will be saved. The
entered weight, age, and time will also be saved with the program.
WARNING: Any program currently saved in that location (User 1 or User 2)
will be overwritten by the new program. To select and recall a saved
program, press the User 1 or User 2 key once.
•
Switching program:
You may switch from current operating program to
another program by pressing a new program key and then ENTER key to
accept the new program.
— If “Classic Program” or “HR Interactive” program key is pressed during a
program-executing mode, it will enter program-switching mode:
— If Enter key is pressed, it will enter this program setup mode. Age and
1190SROM 9/22/06 1:51 PM Page 20
