background image

Connection of the device 

- Check that the tension and the frequency of the electricity network suit to the values 
indicated on the descriptive plate.

 

-  Make sure that every control knob is positioned on 0. 
- Check that neither the cord nor the plug are damaged 
- Unwind completely the electric power cable and connect it in a plug connected with 
the earth. 
- The device is connected. 

NB: in case of connection of the device in a plug without earth protection or directly 
on the electricity network, confide its connection to a qualified person . 

c) Use of device :

Elements of command and display 

Never use the machine without its drip tray (n°5 on picture). 

Putting on 

Turn on the thermostat control knob (n°3 on picture) on the wished position: the 
green pilot light (n°1 on picture) and the orange pilot light (n°2 on picture) ignite. 
The machine is  warming up. Once orange pilot light (n°2 on picture) is off, the 
machine reached the wished temperature. 
Grease the plates before each cooking.  

Temperature setting 

Set  the  temperature  by  positioning  the  thermostat  (No.3  on  picture)  to  the  de-

sired temperature. The orange pilot light (No.2 on picture) switches on if a higher 
level of temperature is required and switches off when the same is reached.   

It is not necessary to leave the device switched on at full power. It is necessary 
to  adapt  the  temperature  to  products  to  be  cooked  to  limit  the  energy  con-
sumption.    
If your food sticks on the plate, reduce the temperature of the thermostat

 

Command/Display 

Function 

Thermostat (n°3 on picture) 

On/off  + Temperature setting 

Green pilot light 
(n°1 on picture) 

Machine on (pilot light on) 
Machine off (pilot light off) 

Orange pilot light 
(n°2 on picture) 

Machine is heating (pilot light on) 
Temperature reached (pilot light off) 

Summary of Contents for PSR 400 EE

















Reviews: