_______________________________
DOUGH
MIXER
IRIS
_______________________________
6
door lock, i.e. it cannot be opened when the
machine is powered.
Protection is guaranteed for the 30-40 version
by the closing system of the upper cover with
main switch and the nut that closes the actual
cover itself. Lastly, the entire machine cycle will
immediately stop if the red stop button (2) on
the control panel is pressed.
1.4 IDENTIFICATION
Each machine has an identification plate (Fig.
2) positioned at the rear (22 Fig. 1), that
provides the following information:
- Manufacturer’s name and address;
- «CE» marking;
A)
Model of the machine;
B)
Serial number;
C)
Year of manufacture;
The data plate also indicates:
Volts :
Voltage
Hz :
Frequency
kW :
Kilowatts
A
:
Amperes
The information on the machine’s identification
plate must be copied into page 2 of this
manual and must always be stated when
spare parts and/or assistance are required.
The «IRIS» dough mixer is equipped with
the following items as part of the standard
supply:
- Operation and maintenance manual of the
machine with a list of spare parts;
- Wiring diagram;
- «CE» Declaration of conformity.
CARATTERISTICHE ELETTRICHE / ELECTRICAL CHARACTERISTICS
CARACTERISTIQUES ELECTRIQUES / CARACTERISTCAS ELECTRICA
Fig. 2 - Identification plate
1.5 NOISE LEVEL
When the dough mixer is operating, the noise
level at the operator’s station is less than 70 dB.
1.6
TECHNICAL SPECIFICATIONS
- Stainless steel bowl;
- Dough tool in highly resistant stainless steel;
- Moving parts assembled on bearings;
- Safety device with lock and immediate brake
that stops the motor as soon as the protective
grille is raised;
- Stove enamelled finish;
- V-belt transmission;
- Two mixing speeds;
- 24 Volt low voltage control panel;
- Two timers.
The timers stop when the protective grille is
raised during the work cycle, in both the first and
second speed mode. The cycle will continue
when the «START» key is pressed and the timers
will start from the same point in which they
stopped.
