HE-2000 Standard_e
18
Put back the protective cap onto the ferrule.
Repeat sequence for all 4 ferrules.
At this point your ferrules should look like this:
In case of Re-Polishing the ferrule may be removed from
the termini.
To remove the ferrules from the termini (150) proceed
as follows:
Take the ferrule extractor (1074651).
Slide the fiber in the instrument’s slit.
Push the instrument into the termini until it clicks.
Hold the fiber and pull the termini out as shown in the
picture.
As soon as you have pulled out the ferrule protect it
with the cap.
In case you have a termini polishing arm, you may directly
Re-Polishing without dismantling the ferrule.
Remove the cap from termini being very careful not to
bump its front face.
Align the notch on the DM 4 adapter (150) and the key
of the termini and slide in till it clicks.
4
Cable preparation
Summary of Contents for HE-2000
Page 1: ...Part No 1902142 Version 07 05 2019 FIBER OPTIC CONNECTORS HE 2000 ASSEMBLY INSTRUCTION ...
Page 6: ...HE 2000 Standard_e 5 2 HE E 2000 CONNECTOR SET MINI BREAKOUT VERSION 2 Connector Set ...
Page 7: ...HE 2000 Standard_e 6 2 1 HE E 2000 CONNECTOR SET METAL TUBE VERSION 2 Connector Set ...