Diamond HE-2000, Assembly Instruction Manual

Page: 13 / 29

HE-2000 Standard_e
12
At the end of the ripcord cut around the cable watching
to ensure the blade does not cut past the jacket.
Be careful not to cut yourself!
If you prefer use the tube stripper to cut the outer jacket.
Remove the outer jacket and start the stripping procedure.
Cut the cable according to the measurement indicated
on the drawing.
Using a stripping plier or a thermal stripper strip the
900µm coating to the measurement indicated on the
drawing.
Mounting tube
This operation may be done by hand.
For bigger quantities we advise the mounting device
(Drawing N°. 000-002-194C000).
Take care to mount the proper guide depending if you
mount Inox (60) or plastic (50) tube.
4
Cable preparation