Minor troubeshooting
You have a doubt about the proper functioning of your equipment ......
this does not
necessarily mean that there is a failure. In all cases, check the following :
Page 8
Unplug the appliance immediately and contact the service center in case of the slightest
breakage or cracks in the ceramic glass hob.
PROBLEM....
POSSIBLE CAUSES
WHAT SHOULD I DO
A light blinks when
switching on
Normal operating
Nothing : This is normal
A fuse blows when
switching on
The appliance’s connections
are defective
Check the connections
or the conformity
of the connections
Continuous ventilation for a
few minutes after the appliance
is switched off
The electronics are
cooling down
This is normal
The appliance is not
working
. The lights on the
control panel are off
The appliance is not powered.
A power or connection problem
Check the fuses and
circuit breaker in
the electrical system
"F" then "-" appears
on the control panel
There is a button permanently
activated on the control panel
If the fault continues,
call the Service Centre
«F» then «7» appears
on the control panel.
The electronic circuits
are overheating
Check the appliance’s
fan system to see
if it is operational
The appliance is not
functioning
, another code is
displayed on the control panel
The electronic circuits
are malfunctioning
Call the Service Centre
Having switched on
the heating zone, the selected
indicator light keeps blinking
The cookware you are using is
not suitable for induction
cooking or has a diameter less
than 12 cm
See cookware section
The cookware is making
noise during cooking
This is a vibration generated by
the electric current flow into
the cookware
This is normal with some types
of cookware. There is no
danger for the appliance
There is a smell during
the first cooking
Appliance is new
Switch the hob on for half an
hour with a saucepan of water
before using for the first time