14
13.
The operation is now complete.
NOTE:
Dispose of hydraulic oil in accordance with local regulations. Do not pour into
the sea, a river, a lake or drains.
BOLT TIGHTNESS
Once a week, or after every 500 cuts, check the tightness of all bolts. Especially, those
bolt which fixing cutter blocks and securing the housing to the cylinder. Loose bolts will
damage part(s) can break easily or could cause injury.
CARBON BRUSHES
Inspect the two carbon brushes at least once every two months. (Nominal brush life is
200 hours).
CARE:
Worn brushes will result in power loss; cause the motor to run hot and
irreparably damage the armature.
1.
Disconnect tool from electrical outlet.
2.
Unscrew both brush caps and pull out carbon brushes.
3.
Replace brushes if less than 6mm in length.
(We recommend the automatic stop carbon brush for replace.)
Automatic stop carbon brush Parts #.7HTK999073B
Standard carbon brush Parts #.7HTK999043B
OVERHAUL
Return the unit to an authorized distributor for overhaul at least once every two years,
sooner if subject to heavy use.
Ignorance of proper operating procedures can lead to accidents.
If you have any other questions about any procedures, please contact the nearest
authorized distributor.
*Specifications are subject to change without prior notice.
