English
HOW TO OPERATE BOTTLE COOLER
1. Insert the power plug into wall outlet.
2. To adjust the temperature turn thermostat knob inside the cabinet.
Temperature Control
Interior light
To completment the look of your colletction, a soft light has been built into the bottle cooler. Simply
turn the switch button and the light comes on, turn again counteractively for off. For maximum
energy efficiency, leave light off when not viewing your collection.
Normal Operating Sounds you may hear
Boiling water, gurgling sounds or slight vibrations is due to the refrigerant circulating through the
cooling coilds.
The thermostat control will click when it cycles on and off.
REVERSING THE DOOR (OPTION)
How to reverse the door
Ø
Remove the lower hinge by loosening and removing the screws with scredriver.
Ø
Carefully lower the door and remove it.
Ø
Move the pivot pin to the opposite hole on the lower hinge.
Ø
Move the pivot pin from the left top hinge to the opposite hole on the right top hinge.
Ø
Remove the two screws from the right holes in the bottom cross bar.
Ø
Take the door. Insert the lower hinge axle into the right bottom hole of the door, make the
right hole of the door into the righjt top hinge axle.
Ø
Adjust the door, make it straight and in alignment with the cabinet.
4
The inner temperature ranges from 0
℃ to 10℃.You can turn the
thermostat knob to have your desired temperature. Turn the knob
clockwise, which the position varies from 1 to 6, you can get a lower
temperature inside. Turn the position to 0, you will switch off your
appliance. Please see fig #1.