English
IMPORTANT SAFETY PRECAUTIONS
Before you use your cooler, please read this instruction manual carefully
.
Use this appliance only for its intended purpose as described in this owner
’s manual.
This cooler must be properly installed in accordance with the installation instructions before it is
used.
Never unplug you cooler by pulling on the power cord. Always grasp the plug firmly and pull
straight out from the wall outlet.
1)
Repair or replace immediately, all electric service cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length, the plug or
the connector end.
2)
Unplug your cooler before cleaning or before making any repairs.
NOTE: If for any reason this product requires service, we strongly recommend that a certified
technician perform the service.
3) Do not operate your cooler in the presence of explosive fumes.
4) The power supply must be properly grounded.
5) Do not use an adapter plug or extension cord.
6) Do not use the unit in the immediate surroundings of a bath, shower or swimming pool.
7) Before discarding or storing, we recommend that you remove the door and leave the shelves in
place. This will reduce the possibility of danger to children.
8) Do not store food in cooler as the interior temperature may not be cool enough to prevent
spoilage.
INSTALLAT ION
It is advisable to clean the inside of the cooler with lukewarm water using a mild detergent,
and then to dry it thoroughly prior to use.
The temperature in the appliance will depend on:
The temperature in the room
The frequency and duration of periods when the door is open.
How many items are in the cooler.
It may therefore be necessary to adjust the thermostat from time to time.
The refrigeration system of the cabinet is designed to operate with the cabinet located on a
flat surface. Avoid tilting the cabinet side.
If the cabinet must be tilted on an angle for handling or moving purposes, allow it to sit in an
upright position 20 to 30 minutes prior to plugging it in and starting the cooling of the storage
compartment.
2