English
Grounding plug and socket should be provided in accordance with local regulations. The
cable-size should meet the cooler
’s requirements. The unit must be connected to proper electrical
network, which is shown on the nameplate, through an omnipoplar circuit-breaker. To assure the
proper function of the cooler, please observe the following recommended.
1.
To ensure the circulation, the unit should be kept at 2 cm, away from the wall.
2.
Locate the unit away from direct sunlight. This will enable you to obtain the best performance
and save energy.
3.
Under no circumstances should the top grid be covered by any objest. It will preclude the
warm air from circulating.
Unpaking Your Cooler
1. Romove all packing material. This includes the foam base and all adhensive tape.
2. Inspect and remove any remains of packing, tape or printed materials before powering on the
cooler.
Leveling Your Cooler
1. There are four leveling legs which are located in the front and rear corners of your cooler. After
properly placing your cooler in its final position,you can level your cooler.
2.
Leveling legs can be adjusted by turning them clockwise to raise your cooler or by turning
them counterclockwise to lower your cooler. The cooler door will close easily when the
leveling legs are extended.
PRODUCT PARTS AND FEATURES
3
① Light
② light switch
③ shelves
④ handle
⑤ leveling legs