Diamond Tech DT50-M, Reference Manual

Page: 34 / 38

D T 5 0 - M C O M M A N D R E F E R E N C E G U I D E 1 . 1 P a g e 34 | 38
1: Yes. The remote and local values are the same.
8.1.7 Inquiry (BR/EDR) +UBTI
AT Command Description
AT+UBTI[=<inquiry_type>,<inquiry_
length>]] Performs an inquiry procedure to find any
discoverable devices in the vicinity.
Response Description
+UBTI:<bd_addr>,<rssi>,<cod>,
<device_name> This response is sent for every found device.
OK Successful response.
ERROR Error message.
Parameter Description
bd_addr Bluetooth device address of a found device
cod See Local COD command (8.1.13)
Inquiry_type 1 (default): General extended inquiry
2: Limited extended inquiry
Inquiry_length Timeout measured in milliseconds
Time range: 10 ms - 40 s, default 5000 ms
device_name Name of the discovered device.
*Names of the discovered devices are returned only
by the devices supporting Bluetooth 2.1 or later.
rssi Received signal strength in dBm.
8.1.8 Discovery (Low Energy) +UBTD
AT Command Description
AT+UBTD[=<discovery_type>[,
<mode>[,<discovery_length>]]] Performs an inquiry procedure to find any
discoverable devices in the vicinity.
Response Description
+UBTD:<bd_addr>,<rssi>,<device_
name>,<data_type>,<data> This response is sent for every found device. If no
name is found, <device_name> is an empty string. If
<mode> is set to Active, both Scan responses and
Advertisements will be shown.
OK Successful response.
ERROR Error message.
Parameter Description
bd_addr Bluetooth device address of a found device
discovery_type 1: All. Displays all found devices; each device is
displayed only once.
2 (default): General inquiry. Displays devices in
General or Limited discoverability mode; each device
is displayed only once.